MS35810-2 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

MS35810-2: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN, diameter: 0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN, material: STEEL COMP 1010 OR STEEL COMP 1111 OVERALL, head_style: FLAT CHAMFER, shear_strength: 3200 DOUBLE POUNDS PER SQUARE INCH, hardness_rating: 70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-610-5729, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS35810-2

NSN: 5315-00-610-5729
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

height	0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
diameter	0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
material	STEEL COMP 1010 OR STEEL COMP 1111 OVERALL
head_style	FLAT CHAMFER
shear_strength	3200 DOUBLE POUNDS PER SQUARE INCH
hardness_rating	70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL
style_designator	STRAIGHT
features_provided	CASEHARDENED
pin_chamfer_angle	40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
pin_head_diameter	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
surface_treatment	CADMIUM OVERALL
under_head_length	0.766 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN
NSN	5315-00-610-5729

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

UNDER HEAD LENGTH: 0.766 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN

•

PIN CHAMFER ANGLE: 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM

•

FIRST HOLE DIAMETER: 0.073 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL

•

STYLE DESIGNATOR: STRAIGHT

•

PIN HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLE	ONE END DRILLED
UNDER HEAD LENGTH	0.766 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN
PIN CHAMFER ANGLE	40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER	0.073 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
HARDNESS RATING	70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
DIAMETER	0.243 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

5315006105729Reference document

Same NSN cross-reference

Reference document — Secondary reference

322241Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy MS35810-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS35810-2?

MS35810-2 is a PIN,STRAIGHT,HEADED.

What parts can replace MS35810-2?

There are 2 known substitutes for MS35810-2: 5315006105729, 322241. Substitute compatibility should be verified for your specific system.

What is the NSN for MS35810-2?

MS35810-2 is cataloged in the U.S. Government catalog under NSN 5315-00-610-5729. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS35810-2 — PIN,STRAIGHT,HEADED

Request a Quote — MS35810-2