PartsTable
Technical Data Sheet
Download PDF

MS35769-10 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MS35769-10: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER CASE, outside_diameter: 0.796 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.562 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN, cross-sectional_thickness: 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN, cross-sectional_shape_style: METAL WITH SOFT FILLER. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-354-7733, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35769-10
NSN: 5330-01-354-7733
NIINs: 013547733, 014323788
FSC: 5330 — Packing and Gasket Materials
CAGE: 0YWF1 — FALCON AEROSPACE, INC (USA)
SPECIFICATIONS
materialCOPPER CASE
outside_diameter0.796 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.562 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
cross-sectional_thickness0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL WITH SOFT FILLER
material_document_and_classificationHH-G-101 FED SPEC SINGLE MATERIAL RESPONSE CASE
NSN5330-01-354-7733
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS35769-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
MAXIMUM PRESSURE RATING: 200.0 POUNDS PER SQUARE INCH (PSI) LBS
•
CRITICALITY CODE JUSTIFICATION: MATT
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-G-101,TYPE 3 FED SPEC ALL MATERIAL RESPONSES CORE
•
CROSS-SECTIONAL SHAPE STYLE: METAL WITH SOFT FILLER
•
OUTSIDE DIAMETER: 0.796 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
MAXIMUM PRESSURE RATING200.0 POUNDS PER SQUARE INCH (PSI) LBS
CRITICALITY CODE JUSTIFICATIONMATT
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-G-101,TYPE 3 FED SPEC ALL MATERIAL RESPONSES CORE
MATERIAL DOCUMENT AND CLASSIFICATIONHH-G-101 FED SPEC SINGLE MATERIAL RESPONSE CASE
CROSS-SECTIONAL SHAPE STYLEMETAL WITH SOFT FILLER
OUTSIDE DIAMETER0.796 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
APERTURE DIAMETER0.562 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
SPECIAL FEATURESAS DIFFERENTIATED BY FILLER OF NON-ASBESTOS MATERIAL
SUBSTITUTES & CROSS-REFERENCES 1
5330PL1782440Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35769-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35769-10?
MS35769-10 is a GASKET.
What parts can replace MS35769-10?
There is 1 known substitute for MS35769-10: 5330PL1782440. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35769-10?
MS35769-10 is cataloged in the U.S. Government catalog under NSN 5330-01-354-7733. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35769-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.