PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35763-817
MS35763-817 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1035 OVERALL, head_style: HEXAGON, head_height: 0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.607 INCHES MINIMUM AND 0.718 INCHES MAXIMUM IN, fastener_length: 0.718 INCHES MINIMUM AND 0.782 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-0493, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35763-817
NSN: 5305-00-022-0493
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1035 OVERALL
head_styleHEXAGON
head_height0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
thread_class2A A
thread_length0.607 INCHES MINIMUM AND 0.718 INCHES MAXIMUM IN
fastener_length0.718 INCHES MINIMUM AND 0.782 INCHES MAXIMUM IN
hardness_rating96.0 ROCKWELL B MINIMUM AND 104.0 ROCKWELL B MAXIMUM OVERALL
locking_featureDISTORTIONS BEARING SURFACE OF HEAD
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NSN5305-00-022-0493
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35763-817 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A A
•
HARDNESS RATING: 96.0 ROCKWELL B MINIMUM AND 104.0 ROCKWELL B MAXIMUM OVERALL
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MINIMUM TENSILE STRENGTH: 95000 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 18
•
MATERIAL: STEEL COMP 1035 OVERALL
•
LOCKING FEATURE: DISTORTIONS BEARING SURFACE OF HEAD
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
HARDNESS RATING96.0 ROCKWELL B MINIMUM AND 104.0 ROCKWELL B MAXIMUM OVERALL
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH95000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH18
MATERIALSTEEL COMP 1035 OVERALL
LOCKING FEATUREDISTORTIONS BEARING SURFACE OF HEAD
NOMINAL THREAD DIAMETER0.312 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
22049-3Interchangeable
interchangeable cross-reference
interchangeable
0726504Interchangeable
interchangeable cross-reference
interchangeable
114017Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35763-817?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35763-817?
MS35763-817 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35763-817?
There are 3 known substitutes for MS35763-817: 22049-3, 0726504, 114017. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35763-817?
MS35763-817 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-0493. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35763-817

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026