PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35763-1086
MS35763-1086 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1035 OVERALL, head_style: HEXAGON, head_height: 0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.107 INCHES MINIMUM AND 1.218 INCHES MAXIMUM IN, fastener_length: 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-022-2002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35763-1086
NSN: 5306-00-022-2002
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1035 OVERALL
head_styleHEXAGON
head_height0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
thread_class2A A
thread_length1.107 INCHES MINIMUM AND 1.218 INCHES MAXIMUM IN
fastener_length1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN
hardness_rating96.0 ROCKWELL B MINIMUM AND 104.0 ROCKWELL B MAXIMUM OVERALL
locking_featureDISTORTIONS BEARING SURFACE OF HEAD
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
NSN5306-00-022-2002
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35763-1086 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN FLATS: 0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
FASTENER LENGTH: 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
FEATURES PROVIDED: FINISHED HEAD
•
LOCKING FEATURE: DISTORTIONS BEARING SURFACE OF HEAD
•
MATERIAL: STEEL COMP 1035 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.798 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
THREAD CLASS2A A
FASTENER LENGTH1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN
HEAD HEIGHT0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
FEATURES PROVIDEDFINISHED HEAD
LOCKING FEATUREDISTORTIONS BEARING SURFACE OF HEAD
MATERIALSTEEL COMP 1035 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.562 INCHES IN
MINIMUM TENSILE STRENGTH95000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
MS35764-1017Upgraded Successor
successor cross-reference
successor
MILB45912Upgraded Successor
successor cross-reference
successor
MS35763-1017Upgraded Successor
successor cross-reference
successor
MS35764-1048Upgraded Successor
successor cross-reference
successor
5306008165991Upgraded Successor
successor cross-reference
successor
MS35763-1048Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35763-1086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35763-1086?
MS35763-1086 is a BOLT,MACHINE.
What parts can replace MS35763-1086?
There are 12 known substitutes for MS35763-1086: MS35764-1017, MILB45912, MS35763-1017 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35763-1086?
MS35763-1086 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-022-2002. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35763-1086

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026