PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35763
MS35763 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1035 OVERALL, head_style: HEXAGON, head_height: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN, fastener_length: 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-1929, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35763
NSN: 5305-00-022-1929
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1035 OVERALL
head_styleHEXAGON
head_height0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
thread_class2A A
thread_length0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
fastener_length1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN
hardness_rating96.0 ROCKWELL B MINIMUM AND 104.0 ROCKWELL B MAXIMUM OVERALL
locking_featureDISTORTIONS BEARING SURFACE OF HEAD
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
NSN5305-00-022-1929
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35763 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOCKING FEATURE: DISTORTIONS BEARING SURFACE OF HEAD
•
MATERIAL: STEEL COMP 1035 OVERALL
•
THREAD QUANTITY PER INCH: 28
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
FEATURES PROVIDED: FINISHED HEAD
•
HARDNESS RATING: 96.0 ROCKWELL B MINIMUM AND 104.0 ROCKWELL B MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LOCKING FEATUREDISTORTIONS BEARING SURFACE OF HEAD
MATERIALSTEEL COMP 1035 OVERALL
THREAD QUANTITY PER INCH28
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
FEATURES PROVIDEDFINISHED HEAD
HARDNESS RATING96.0 ROCKWELL B MINIMUM AND 104.0 ROCKWELL B MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH95000 POUNDS PER SQUARE INCH LBS
FASTENER LENGTH1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
7902751-99Interchangeable
interchangeable cross-reference
interchangeable
13-12932-00Interchangeable
interchangeable cross-reference
interchangeable
6143W10P114Interchangeable
interchangeable cross-reference
interchangeable
221929Interchangeable
interchangeable cross-reference
interchangeable
MILB45912Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35763?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35763?
MS35763 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35763?
There are 5 known substitutes for MS35763: 7902751-99, 13-12932-00, 6143W10P114 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35763?
MS35763 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-1929. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35763

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026