PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35751-54
MS35751-54 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,SQUARE NECK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: BUTTON, neck_width: 0.307 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN, head_height: 0.156 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN, neck_length: 0.156 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN, thread_class: 2A A. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-404-1385, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35751-54
NSN: 5306-00-404-1385
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleBUTTON
neck_width0.307 INCHES MINIMUM AND 0.324 INCHES MAXIMUM IN
head_height0.156 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
neck_length0.156 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.688 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
thread_length0.875 INCHES MINIMUM IN
fastener_length4.469 INCHES MINIMUM AND 4.531 INCHES MAXIMUM IN
hardness_rating95.0 ROCKWELL B MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
NSN5306-00-404-1385
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35751-54 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: BUTTON
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
HEAD DIAMETER: 0.688 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
HARDNESS RATING: 95.0 ROCKWELL B MAXIMUM OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
HEAD HEIGHT: 0.156 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
•
NECK LENGTH: 0.156 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEBUTTON
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
HEAD DIAMETER0.688 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
HARDNESS RATING95.0 ROCKWELL B MAXIMUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
HEAD HEIGHT0.156 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
NECK LENGTH0.156 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
THREAD CLASS2A A
NOMINAL THREAD DIAMETER0.312 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
109115Upgraded Successor
successor cross-reference
successor
120955Upgraded Successor
successor cross-reference
successor
FFB584Upgraded Successor
successor cross-reference
successor
MT58Upgraded Successor
successor cross-reference
successor
MS35751-19Upgraded Successor
successor cross-reference
successor
MS35752&11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35751-54?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35751-54?
MS35751-54 is a BOLT,SQUARE NECK.
What parts can replace MS35751-54?
There are 17 known substitutes for MS35751-54: 109115, 120955, FFB584 and 14 more. Substitute compatibility should be verified for your specific system.
Is MS35751-54 still available?
MS35751-54 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35751-54

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026