PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35751-164
MS35751-164 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,SQUARE NECK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: BUTTON, neck_width: 0.616 INCHES MINIMUM AND 0.642 INCHES MAXIMUM IN, head_height: 0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN, neck_length: 0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN, head_diameter: 1.219 INCHES MINIMUM AND 1.344 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-268-2440, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35751-164
NSN: 5306-00-268-2440
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleBUTTON
neck_width0.616 INCHES MINIMUM AND 0.642 INCHES MAXIMUM IN
head_height0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
neck_length0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
head_diameter1.219 INCHES MINIMUM AND 1.344 INCHES MAXIMUM IN
fastener_length4.875 INCHES MINIMUM AND 5.125 INCHES MAXIMUM IN
hardness_rating95.0 ROCKWELL B MAXIMUM OVERALL
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
nominal_thread_diameter0.625 INCHES IN
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
nondefinitive_spec/std_data1 TYPE AND 1 CLASS AND B STYLE
NSN5306-00-268-2440
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35751-164 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NECK WIDTH: 0.616 INCHES MINIMUM AND 0.642 INCHES MAXIMUM IN
•
HEAD STYLE: BUTTON
•
HARDNESS RATING: 95.0 ROCKWELL B MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
HEAD HEIGHT: 0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
NECK LENGTH: 0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NECK WIDTH0.616 INCHES MINIMUM AND 0.642 INCHES MAXIMUM IN
HEAD STYLEBUTTON
HARDNESS RATING95.0 ROCKWELL B MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
HEAD HEIGHT0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.625 INCHES IN
NECK LENGTH0.313 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
FASTENER LENGTH4.875 INCHES MINIMUM AND 5.125 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
109115Upgraded Successor
successor cross-reference
successor
120955Upgraded Successor
successor cross-reference
successor
FFB584Upgraded Successor
successor cross-reference
successor
MT58Upgraded Successor
successor cross-reference
successor
MS35751-19Upgraded Successor
successor cross-reference
successor
MS35752&11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35751-164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35751-164?
MS35751-164 is a BOLT,SQUARE NECK.
What parts can replace MS35751-164?
There are 14 known substitutes for MS35751-164: 109115, 120955, FFB584 and 11 more. Substitute compatibility should be verified for your specific system.
Is MS35751-164 still available?
MS35751-164 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35751-164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026