PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35751-132
MS35751-132 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,SQUARE NECK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: BUTTON, neck_width: 0.492 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, head_height: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, neck_length: 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN, head_diameter: 1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-01-030-5632, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35751-132
NSN: 5306-01-030-5632
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleBUTTON
neck_width0.492 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
head_height0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
neck_length0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
head_diameter1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
fastener_length3.170 INCHES MINIMUM AND 3.310 INCHES MAXIMUM IN
hardness_rating95.0 ROCKWELL B MAXIMUM OVERALL
surface_treatmentCADMIUM AND CHROMATE OR ZINC OVERALL
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
nondefinitive_spec/std_data1 TYPE AND 1 CLASS AND A000 STYLE
NSN5306-01-030-5632
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35751-132 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY2 CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
HEAD STYLE: BUTTON
•
HEAD DIAMETER: 1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HARDNESS RATING: 95.0 ROCKWELL B MAXIMUM OVERALL
•
NECK LENGTH: 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY2 CL3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
HEAD STYLEBUTTON
HEAD DIAMETER1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
NOMINAL THREAD DIAMETER0.500 INCHES IN
HARDNESS RATING95.0 ROCKWELL B MAXIMUM OVERALL
NECK LENGTH0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
FASTENER LENGTH3.170 INCHES MINIMUM AND 3.310 INCHES MAXIMUM IN
HEAD HEIGHT0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
109115Upgraded Successor
successor cross-reference
successor
120955Upgraded Successor
successor cross-reference
successor
FFB584Upgraded Successor
successor cross-reference
successor
MT58Upgraded Successor
successor cross-reference
successor
MS35751-19Upgraded Successor
successor cross-reference
successor
MS35752&11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35751-132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35751-132?
MS35751-132 is a BOLT,SQUARE NECK.
What parts can replace MS35751-132?
There are 14 known substitutes for MS35751-132: 109115, 120955, FFB584 and 11 more. Substitute compatibility should be verified for your specific system.
Is MS35751-132 still available?
MS35751-132 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35751-132

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026