PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35748-1
MS35748-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, peripheral_diameter: 1.625 INCHES NOMINAL IN, center_hole_diameter: 0.750 INCHES NOMINAL IN, cross-sectional_height: 0.344 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN, cross-sectional_thickness: 0.377 INCHES NOMINAL IN, cross-sectional_shape_style: FLANGE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-090-2128, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35748-1
NSN: 5330-00-090-2128
FSC: 5330
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
peripheral_diameter1.625 INCHES NOMINAL IN
center_hole_diameter0.750 INCHES NOMINAL IN
cross-sectional_height0.344 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
cross-sectional_thickness0.377 INCHES NOMINAL IN
cross-sectional_shape_styleFLANGE
NSN5330-00-090-2128
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS35748-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
CENTER HOLE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.344 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.377 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEFLANGE
CENTER HOLE DIAMETER0.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL HEIGHT0.344 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.377 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
DM7474DInterchangeable
interchangeable cross-reference
interchangeable
SN74LS74N10P1Interchangeable
interchangeable cross-reference
interchangeable
ES48TTL-7474Interchangeable
interchangeable cross-reference
interchangeable
MN1202CInterchangeable
interchangeable cross-reference
interchangeable
N1202CInterchangeable
interchangeable cross-reference
interchangeable
MS35746-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35748-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35748-1?
MS35748-1 is a PACKING,PREFORMED.
What parts can replace MS35748-1?
There are 21 known substitutes for MS35748-1: DM7474D, SN74LS74N10P1, ES48TTL-7474 and 18 more. Substitute compatibility should be verified for your specific system.
Is MS35748-1 still available?
MS35748-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35748-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026