PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35692-1224
MS35692-1224 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, hardness_rating: 121.0 BRINELL STANDARD MINIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-964-0993, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35692-1224
NSN: 5310-00-964-0993
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
hardness_rating121.0 BRINELL STANDARD MINIMUM
thread_directionRIGHT-HAND
width_across_flats1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch16
NSN5310-00-964-0993
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35692-1224 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
HARDNESS RATING: 121.0 BRINELL STANDARD MINIMUM
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD SERIES: UNF
•
THREAD QUANTITY PER INCH: 16
•
WIDTH ACROSS FLATS: 1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE0.750 INCHES IN
HARDNESS RATING121.0 BRINELL STANDARD MINIMUM
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD SERIESUNF
THREAD QUANTITY PER INCH16
WIDTH ACROSS FLATS1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
NUT HEIGHT0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NUT STYLESLOTTED, HEXAGON
THREAD CLASS2B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
46001Interchangeable
interchangeable cross-reference
interchangeable
1A8C-7 LESS OPERInterchangeable
interchangeable cross-reference
interchangeable
1A8C-7 LESS 0PEInterchangeable
interchangeable cross-reference
interchangeable
EE34739Interchangeable
interchangeable cross-reference
interchangeable
Q4600-1Interchangeable
interchangeable cross-reference
interchangeable
66A91J001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35692-1224?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35692-1224?
MS35692-1224 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace MS35692-1224?
There are 17 known substitutes for MS35692-1224: 46001, 1A8C-7 LESS OPER, 1A8C-7 LESS 0PE and 14 more. Substitute compatibility should be verified for your specific system.
Is MS35692-1224 still available?
MS35692-1224 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35692-1224

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026