PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35692-1222
MS35692-1222 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, hardness_rating: 69.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-543-5844, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35692-1222
NSN: 5310-00-543-5844
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.617 INCHES MINIMUM AND 0.665 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
hardness_rating69.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats1.088 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
nominal_thread_size0.750 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch16
NSN5310-00-543-5844
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35692-1222 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 16
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC AND CHROMATE OVERALL
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
WIDTH ACROSS FLATS: 1.125 INCHES NOMINAL IN
•
NUT HEIGHT: 0.641 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH16
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OR ZINC AND CHROMATE OVERALL
THREAD SERIESUNF
NOMINAL THREAD SIZE0.750 INCHES IN
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
WIDTH ACROSS FLATS1.125 INCHES NOMINAL IN
NUT HEIGHT0.641 INCHES NOMINAL IN
THREAD CLASS2B
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
125253Interchangeable
interchangeable cross-reference
interchangeable
33X30RInterchangeable
interchangeable cross-reference
interchangeable
FFN836GPBTYPE1STYLE3Interchangeable
interchangeable cross-reference
interchangeable
427639Interchangeable
interchangeable cross-reference
interchangeable
MS35692-522Interchangeable
interchangeable cross-reference
interchangeable
5310005435971Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35692-1222?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35692-1222?
MS35692-1222 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace MS35692-1222?
There are 15 known substitutes for MS35692-1222: 125253, 33X30R, FFN836GPBTYPE1STYLE3 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35692-1222?
MS35692-1222 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-543-5844. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35692-1222

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026