PartsTable
Technical Data Sheet
Download PDF

MS35690-604 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS35690-604: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), hardness_rating: 69.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-655-9544, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35690-604
NSN: 5310-00-655-9544
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
hardness_rating69.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
width_across_flats0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
nominal_thread_size0.375 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch16
NSN5310-00-655-9544
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35690-604 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HARDNESS RATING: 69.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT HEIGHT: 0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HARDNESS RATING69.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT HEIGHT0.320 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH16
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
B18.6.3Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASME B18.2.2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5310006559544Reference document
Same NSN cross-reference
Reference document — Secondary reference
M909AReference document
Same NSN cross-reference
Reference document — Secondary reference
FF-N-836Reference document
Same NSN cross-reference
Reference document — Secondary reference
28902Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35690-604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35690-604?
MS35690-604 is a NUT,PLAIN,HEXAGON.
What parts can replace MS35690-604?
There are 6 known substitutes for MS35690-604: B18.6.3, ASME B18.2.2, 5310006559544 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35690-604?
MS35690-604 is cataloged in the U.S. Government catalog under NSN 5310-00-655-9544. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35690-604

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.