PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35650-45
MS35650-45 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: HEXAGON, nut_height: 0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-5159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35650-45
NSN: 5310-00-275-5159
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleHEXAGON
nut_height0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
nominal_thread_size0.112 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch48
departure_from_cited_documentAS MODIFIED BY MATERIAL
material_document_and_classificationMIL-B-895-CANC MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-275-5159
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35650-45 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH ACROSS FLATS: 0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 48
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
BEARING SURFACE TYPE: CHAMFERED
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
WIDTH ACROSS FLATS0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH48
THREAD SERIESUNF
NOMINAL THREAD SIZE0.112 INCHES IN
BEARING SURFACE TYPECHAMFERED
NUT STYLEHEXAGON
THREAD CLASS2B
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-895-CANC MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
265561PC87Interchangeable
interchangeable cross-reference
interchangeable
1581000058Interchangeable
interchangeable cross-reference
interchangeable
FFN836GPCTYPE2STYLE2Interchangeable
interchangeable cross-reference
interchangeable
MS35649-286NInterchangeable
interchangeable cross-reference
interchangeable
10515Interchangeable
interchangeable cross-reference
interchangeable
265561PC88Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35650-45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35650-45?
MS35650-45 is a NUT,PLAIN,HEXAGON.
What parts can replace MS35650-45?
There are 10 known substitutes for MS35650-45: 265561PC87, 1581000058, FFN836GPCTYPE2STYLE2 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35650-45?
MS35650-45 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-275-5159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35650-45

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026