PartsTable
Technical Data Sheet
Download PDF

MS35649225 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS35649225: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 360 OVERALL, nut_style: HEXAGON, nut_height: 0.057 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-268-6116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35649225
NSN: 5310-00-268-6116
NIINs: 002686116, 009349740
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 360 OVERALL
nut_styleHEXAGON
nut_height0.057 INCHES MINIMUM AND 0.066 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
width_across_flats0.180 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
nominal_thread_size0.086 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch56
nondefinitive_spec/std_data2 TYPE AND 13 STYLE
NSN5310-00-268-6116
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35649225 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
NUT HEIGHT: 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.112 INCHES IN
NUT HEIGHT0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH40
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
8040Reference document
Same NSN cross-reference
Reference document — Secondary reference
5810-2100Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
02150-25Reference document
Same NSN cross-reference
Reference document — Secondary reference
313-0156-100Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
313-0156-000Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
1932833-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS35649225?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35649225?
MS35649225 is a NUT,PLAIN,HEXAGON.
What parts can replace MS35649225?
There are 8 known substitutes for MS35649225: 8040, 5810-2100, 02150-25 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35649225?
MS35649225 is cataloged in the U.S. Government catalog under NSN 5310-00-268-6116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35649225