PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35648-17
MS35648-17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include radius: 4.156 INCHES NOMINAL IN, material: STEEL, outside_diameter: 2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM IN, style_designator: CONCAVE, material_thickness: 0.083 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-054-1418, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35648-17
NSN: 5340-00-054-1418
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
radius4.156 INCHES NOMINAL IN
materialSTEEL
outside_diameter2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM IN
style_designatorCONCAVE
material_thickness0.083 INCHES NOMINAL IN
NSN5340-00-054-1418
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS35648-17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM IN
•
RADIUS: 4.156 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCONCAVE
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
OUTSIDE DIAMETER2.495 INCHES MINIMUM AND 2.505 INCHES MAXIMUM IN
RADIUS4.156 INCHES NOMINAL IN
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
480393-1Interchangeable
interchangeable cross-reference
interchangeable
A-A-52420-15Interchangeable
interchangeable cross-reference
interchangeable
140089Interchangeable
interchangeable cross-reference
interchangeable
WPP1677Interchangeable
interchangeable cross-reference
interchangeable
S703Interchangeable
interchangeable cross-reference
interchangeable
172531Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35648-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35648-17?
MS35648-17 is a PLUG,EXPANSION.
What parts can replace MS35648-17?
There are 29 known substitutes for MS35648-17: 480393-1, A-A-52420-15, 140089 and 26 more. Substitute compatibility should be verified for your specific system.
Is MS35648-17 still available?
MS35648-17 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35648-17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026