PartsTable
Technical Data Sheet
MS35647-5 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PADLOCK is a the manufacturer industrial component. Key specifications include chain_length: 9.000 INCHES NOMINAL IN, construction: LAMINATED, overall_width: 1.500 INCHES NOMINAL IN, overall_height: 4.660 INCHES NOMINAL IN, shackle_diameter: 0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN, shackle_clearance: 2.500 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-004-5180, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35647-5
NSN: 5340-01-004-5180
FSC: 5340
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
chain_length9.000 INCHES NOMINAL IN
constructionLAMINATED
overall_width1.500 INCHES NOMINAL IN
overall_height4.660 INCHES NOMINAL IN
shackle_diameter0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN
shackle_clearance2.500 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
surface_treatmentLACQUER OVERALL
key_change_quantity5000
operating_mechanism_typePIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
NSN5340-01-004-5180
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MS35647-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT: LACQUER OVERALL
SHACKLE CLEARANCE: 2.500 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
SHACKLE DIAMETER: 0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN
CONSTRUCTION: LAMINATED
KEY CHANGE QUANTITY: 5000
OPERATING MECHANISM TYPE: PIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
CHAIN LENGTH: 9.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTLACQUER OVERALL
SHACKLE CLEARANCE2.500 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
SHACKLE DIAMETER0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN
CONSTRUCTIONLAMINATED
KEY CHANGE QUANTITY5000
OPERATING MECHANISM TYPEPIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
CHAIN LENGTH9.000 INCHES NOMINAL IN
OVERALL HEIGHT4.660 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
A-A-59487Upgraded Successor
successor cross-reference
successor
A-A-59486Upgraded Successor
successor cross-reference
successor
A-A-59487-2SSUpgraded Successor
successor cross-reference
successor
AA59486-2AS06S0E2SUpgraded Successor
successor cross-reference
successor
AA59486-2AS05S0E2SUpgraded Successor
successor cross-reference
successor
AA59486-2AS04S0E2SUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35647-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35647-5?
MS35647-5 is a PADLOCK.
What parts can replace MS35647-5?
There are 18 known substitutes for MS35647-5: A-A-59487, A-A-59486, A-A-59487-2SS and 15 more. Substitute compatibility should be verified for your specific system.
Is MS35647-5 still available?
MS35647-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35647-5