PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35495-215
MS35495-215 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, head_style: ROUND, head_height: 0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN, head_diameter: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, fastener_length: 1.000 INCHES NOMINAL IN, internal_drive_style: SLOT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-290-2663, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35495-215
NSN: 5305-00-290-2663
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
head_styleROUND
head_height0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
head_diameter0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
fastener_length1.000 INCHES NOMINAL IN
internal_drive_styleSLOT
nonmachine_thread_styleWOOD SCREW (TYPE WD)
nondefinitive_spec/std_data1S STYLE
nonmachine_nominal_thread_diameter0.112 INCHES IN
material_document_and_classificationQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-N-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5305-00-290-2663
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35495-215 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81348-FFS111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). OR 96906-MS35495 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
•
NONDEFINITIVE SPEC/STD DATA: 1S STYLE
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-N-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
INTERNAL DRIVE STYLE: SLOT
•
MATERIAL: COPPER ALLOY OVERALL
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.112 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM IN
TEST DATA DOCUMENT81348-FFS111 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). OR 96906-MS35495 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
NONDEFINITIVE SPEC/STD DATA1S STYLE
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-N-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
INTERNAL DRIVE STYLESLOT
MATERIALCOPPER ALLOY OVERALL
NONMACHINE NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD DIAMETER0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
HEAD STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
108205Interchangeable
interchangeable cross-reference
interchangeable
106090Interchangeable
interchangeable cross-reference
interchangeable
FFS111Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35495-215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35495-215?
MS35495-215 is a SCREW,WOOD.
What parts can replace MS35495-215?
There are 3 known substitutes for MS35495-215: 108205, 106090, FFS111. Substitute compatibility should be verified for your specific system.
Is MS35495-215 still available?
MS35495-215 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35495-215

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026