PartsTable
Technical Data Sheet
Download PDF

MS35494-5 — SCREW,WOOD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35494-5: SCREW,WOOD.

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1022 OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, fastener_length: 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-230-6490, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35494-5
NSN: 5305-01-230-6490
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1022 OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
fastener_length0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OVERALL
internal_drive_styleSLOT
nonmachine_thread_styleWOOD SCREW (TYPE WD)
specification/standard_data96906-MS35494 GOVERNMENT STANDARD
nonmachine_nominal_thread_diameter0.086 INCHES IN
material_document_and_classificationQQ-S-631 FED SPEC ALL MATERIAL RESPONSES OR QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
NSN5305-01-230-6490
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35494-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
FASTENER LENGTH: 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-631 FED SPEC ALL MATERIAL RESPONSES OR QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
HEAD STYLE: FLAT COUNTERSUNK
•
SPECIFICATION/STANDARD DATA: 96906-MS35494 GOVERNMENT STANDARD
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.086 INCHES IN
FASTENER LENGTH0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-631 FED SPEC ALL MATERIAL RESPONSES OR QQ-W-405 FED SPEC ALL MATERIAL RESPONSES OVERALL
HEAD STYLEFLAT COUNTERSUNK
SPECIFICATION/STANDARD DATA96906-MS35494 GOVERNMENT STANDARD
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
INTERNAL DRIVE STYLESLOT
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 2
9400064Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN550-2-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35494-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35494-5?
MS35494-5 is a SCREW,WOOD.
What parts can replace MS35494-5?
There are 2 known substitutes for MS35494-5: 9400064, AN550-2-6. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35494-5?
MS35494-5 is cataloged in the U.S. Government catalog under NSN 5305-01-230-6490. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35494-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.