PartsTable
Technical Data Sheet
Download PDF

MS35492-295 — SCREW,WOOD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35492-295: SCREW,WOOD.

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN, fastener_length: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, internal_drive_style: CROSS RECESS TYPE 1. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-014-9403, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-295
NSN: 5305-00-014-9403
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
fastener_length0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND 2C STYLE
nonmachine_nominal_thread_diameter0.242 INCHES IN
NSN5305-00-014-9403
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-295 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.242 INCHES IN
•
FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-321 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC 3RD MATERIAL RESPONSE OVERALL
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2C STYLE
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.242 INCHES IN
FASTENER LENGTH0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-321 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC 3RD MATERIAL RESPONSE OVERALL
HEAD STYLEFLAT COUNTERSUNK
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2C STYLE
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
MATERIALCOPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
HEAD DIAMETER0.437 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
FFS111Reference document
Same NSN cross-reference
Reference document — Identification reference
149403Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy MS35492-295?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-295?
MS35492-295 is a SCREW,WOOD.
What parts can replace MS35492-295?
There are 2 known substitutes for MS35492-295: FFS111, 149403. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35492-295?
MS35492-295 is cataloged in the U.S. Government catalog under NSN 5305-00-014-9403. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-295

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.