PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492-272
MS35492-272 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_diameter: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, fastener_length: 0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, special_features: THREADS: 13 THREADS PER INCH, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, internal_drive_style: CROSS RECESS TYPE 1. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-901-3124, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-272
NSN: 5305-00-901-3124
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_diameter0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
fastener_length0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
special_featuresTHREADS: 13 THREADS PER INCH
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE
nonmachine_nominal_thread_diameter0.190 INCHES IN
material_document_and_classificationASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5305-00-901-3124
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-272 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD STYLEFLAT COUNTERSUNK
NONDEFINITIVE SPEC/STD DATA1 TYPE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM-B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HEAD DIAMETER0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
SPECIAL FEATURESTHREADS: 13 THREADS PER INCH
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
FASTENER LENGTH0.703 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
ANSI B18.6.1Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111 TY1ST2CInterchangeable
interchangeable cross-reference
interchangeable
MS35492-80Interchangeable
interchangeable cross-reference
interchangeable
149367Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
MIL-S-971Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492-272?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-272?
MS35492-272 is a SCREW,WOOD.
What parts can replace MS35492-272?
There are 17 known substitutes for MS35492-272: ANSI B18.6.1, FF-S-111 TY1ST2C, MS35492-80 and 14 more. Substitute compatibility should be verified for your specific system.
Is MS35492-272 still available?
MS35492-272 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-272

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026