PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492-228
MS35492-228 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, fastener_length: 0.500 INCHES NOMINAL IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, internal_drive_style: CROSS RECESS TYPE 1. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-9247, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-228
NSN: 5305-00-014-9247
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
fastener_length0.500 INCHES NOMINAL IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nonmachine_nominal_thread_diameter0.138 INCHES IN
NSN5305-00-014-9247
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-228 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD DIAMETER: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-321 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC 3RD MATERIAL RESPONSE OVERALL
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD DIAMETER0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNK
MATERIALCOPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-B-626 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 ALLOY 268 1/4 H FED SPEC 2ND MATERIAL RESPONSE OR QQ-W-321 ALLOY 260 1/4 H FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-321 ALLOY 270 1/4 H FED SPEC 3RD MATERIAL RESPONSE OVERALL
FASTENER LENGTH0.500 INCHES NOMINAL IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
NL422W12-010Interchangeable
interchangeable cross-reference
interchangeable
MIL-I-23264/2Interchangeable
interchangeable cross-reference
interchangeable
39-42Interchangeable
interchangeable cross-reference
interchangeable
MILV16721Interchangeable
interchangeable cross-reference
interchangeable
394Interchangeable
interchangeable cross-reference
interchangeable
14459AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492-228?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-228?
MS35492-228 is a SCREW,WOOD.
What parts can replace MS35492-228?
There are 11 known substitutes for MS35492-228: NL422W12-010, MIL-I-23264/2, 39-42 and 8 more. Substitute compatibility should be verified for your specific system.
Is MS35492-228 still available?
MS35492-228 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-228

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026