PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492-20
MS35492-20 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,WOOD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.220 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, fastener_length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, surface_treatment: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-009-7720, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492-20
NSN: 5305-00-009-7720
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.220 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
fastener_length0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_data1 TYPE AND C STYLE
nonmachine_nominal_thread_diameter0.125 INCHES IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5305-00-009-7720
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492-20 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.125 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND C STYLE
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
•
HEAD DIAMETER: 0.220 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE NOMINAL THREAD DIAMETER0.125 INCHES IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND C STYLE
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
HEAD DIAMETER0.220 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNK
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
FASTENER LENGTH0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
FFS111Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492-20?
MS35492-20 is a SCREW,WOOD.
What parts can replace MS35492-20?
There is 1 known substitute for MS35492-20: FFS111. Substitute compatibility should be verified for your specific system.
Is MS35492-20 still available?
MS35492-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026