PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35492 SZ12 1-1/2IN.
MS35492 SZ12 1-1/2IN. ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The MS35492 SZ12 1-1/2IN. is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-901-3131, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35492 SZ12 1-1/2IN.
NSN: 5305-00-901-3131
FSC: 5305
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
Part NumberMS35492 SZ12 1-1/2IN.
NSN5305-00-901-3131
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35492 SZ12 1-1/2IN. · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
FASTENER LENGTH: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B16 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM B36 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HEAD DIAMETER0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
FASTENER LENGTH1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD STYLEFLAT COUNTERSUNK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
ANSI B18.6.1Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111 TY1ST2CInterchangeable
interchangeable cross-reference
interchangeable
MS35492-80Interchangeable
interchangeable cross-reference
interchangeable
149367Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
385624Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35492 SZ12 1-1/2IN.?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35492 SZ12 1-1/2IN.?
MS35492 SZ12 1-1/2IN. is a MS35492 SZ12 1-1/2IN..
What parts can replace MS35492 SZ12 1-1/2IN.?
There are 15 known substitutes for MS35492 SZ12 1-1/2IN.: ANSI B18.6.1, FF-S-111 TY1ST2C, MS35492-80 and 12 more. Substitute compatibility should be verified for your specific system.
Is MS35492 SZ12 1-1/2IN. still available?
MS35492 SZ12 1-1/2IN. is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35492 SZ12 1-1/2IN.

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026