PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35490-7
MS35490-7 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, groove_width: 0.031 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN, grommet_style: ROUND, hole_diameter: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, overall_height: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, flange_thickness: 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-060-0976, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35490-7
NSN: 5325-00-060-0976
FSC: 5325
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
groove_width0.031 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
grommet_styleROUND
hole_diameter0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
overall_height0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
flange_thickness0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
features_providedCOOLANT RESISTANT AND OIL RESISTANT
groove_outside_diameter0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
grommet_construction_typeSOLID
nonmetallic_hardness_rating45.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
large_flange_outside_diameter0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
NSN5325-00-060-0976
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35490-7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET STYLE: ROUND
•
FEATURES PROVIDED: COOLANT RESISTANT AND OIL RESISTANT
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
GROOVE OUTSIDE DIAMETER: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
GROMMET CONSTRUCTION TYPE: SOLID
•
NONMETALLIC HARDNESS RATING: 45.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
TECHNICAL CHARACTERISTICS (FLIS)
GROMMET STYLEROUND
FEATURES PROVIDEDCOOLANT RESISTANT AND OIL RESISTANT
MATERIALRUBBER SYNTHETIC OVERALL
GROOVE OUTSIDE DIAMETER0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
FLANGE THICKNESS0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
GROMMET CONSTRUCTION TYPESOLID
NONMETALLIC HARDNESS RATING45.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
OVERALL HEIGHT0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
HOLE DIAMETER0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
LARGE FLANGE OUTSIDE DIAMETER0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
3761Interchangeable
interchangeable cross-reference
interchangeable
45-1354Interchangeable
interchangeable cross-reference
interchangeable
540-055Interchangeable
interchangeable cross-reference
interchangeable
N3761Interchangeable
interchangeable cross-reference
interchangeable
88522Interchangeable
interchangeable cross-reference
interchangeable
DC610RMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35490-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35490-7?
MS35490-7 is a GROMMET,NONMETALLIC.
What parts can replace MS35490-7?
There are 7 known substitutes for MS35490-7: 3761, 45-1354, 540-055 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35490-7?
MS35490-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-060-0976. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35490-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026