PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35426-16
MS35426-16 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,WING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: WING, thread_class: 2B, body_diameter: 0.640 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN, thread_series: UNF, overall_height: 0.650 INCHES MINIMUM AND 0.790 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-004-3220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35426-16
NSN: 5310-00-004-3220
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleWING
thread_class2B
body_diameter0.640 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
thread_seriesUNF
overall_height0.650 INCHES MINIMUM AND 0.790 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
wing_spread_width1.310 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
fabrication_methodFORGED
nominal_thread_size0.375 INCHES IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
NSN5310-00-004-3220
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35426-16 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
MATERIAL: STEEL OVERALL
•
DRILLED HOLE DIAMETER: 0.070 INCHES NOMINAL IN
•
WING SPREAD WIDTH: 1.310 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 24
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 2 STYLE
•
BODY DIAMETER: 0.640 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
•
HOLE TYPE AND QUANTITY: 1 DRILLED
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
MATERIALSTEEL OVERALL
DRILLED HOLE DIAMETER0.070 INCHES NOMINAL IN
WING SPREAD WIDTH1.310 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH24
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 STYLE
BODY DIAMETER0.640 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
HOLE TYPE AND QUANTITY1 DRILLED
NUT STYLEWING
NOMINAL THREAD SIZE0.375 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
300199Interchangeable
interchangeable cross-reference
interchangeable
5900025-0000.003Interchangeable
interchangeable cross-reference
interchangeable
5310008278487Interchangeable
interchangeable cross-reference
interchangeable
219205Interchangeable
interchangeable cross-reference
interchangeable
SNRG.M113.1803.001Interchangeable
interchangeable cross-reference
interchangeable
MS35426-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35426-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35426-16?
MS35426-16 is a NUT,PLAIN,WING.
What parts can replace MS35426-16?
There are 7 known substitutes for MS35426-16: 300199, 5900025-0000.003, 5310008278487 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35426-16?
MS35426-16 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-004-3220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35426-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026