PartsTable
Technical Data Sheet
Download PDF

MS35425-39 — NUT,PLAIN,WING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS35425-39: NUT,PLAIN,WING.

The NUT,PLAIN,WING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: WING, thread_class: 2B, body_diameter: 0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL COARSE (UNC), overall_height: 0.430 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-080-8495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35425-39
NSN: 5310-00-080-8495
NIINs: 000808495, 010077077
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleWING
thread_class2B
body_diameter0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_height0.430 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
wing_spread_width0.960 INCHES MINIMUM AND 1.100 INCHES MAXIMUM IN
fabrication_methodFORGED
nominal_thread_size0.250 INCHES IN
drilled_hole_diameter0.070 INCHES NOMINAL IN
NSN5310-00-080-8495
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35425-39 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY DIAMETER: 0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HOLE CONFIGURATION STYLE: CONFIGURATION K
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 2 STYLE
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.450 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
OVERALL HEIGHT0.430 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HOLE CONFIGURATION STYLECONFIGURATION K
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 STYLE
DRILLED HOLE DIAMETER0.070 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
FFN845Reference document
Same NSN cross-reference
Reference document — Identification reference
5310000808495Reference document
Same NSN cross-reference
Reference document — Informative reference only
5118-73-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
PD147Reference document
Same NSN cross-reference
Reference document — Secondary reference
71479-39Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MS35425-39?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35425-39?
MS35425-39 is a NUT,PLAIN,WING.
What parts can replace MS35425-39?
There are 5 known substitutes for MS35425-39: FFN845, 5310000808495, 5118-73-5 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35425-39?
MS35425-39 is cataloged in the U.S. Government catalog under NSN 5310-00-080-8495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35425-39

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.