PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35425-22
MS35425-22 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,WING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: WING, thread_class: 2B, body_diameter: 0.515 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL COARSE (UNC), overall_height: 0.595 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-660-2810, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35425-22
NSN: 5310-00-660-2810
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleWING
thread_class2B
body_diameter0.515 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_height0.595 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC AND CHROMATE OVERALL
wing_spread_width1.193 INCHES MINIMUM AND 1.243 INCHES MAXIMUM IN
fabrication_methodFORGED
nominal_thread_size0.312 INCHES IN
thread_quantity_per_inch18
NSN5310-00-660-2810
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35425-22 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM OR ZINC AND CHROMATE OVERALL
•
THREAD QUANTITY PER INCH: 18
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
BODY DIAMETER: 0.515 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
WING SPREAD WIDTH: 1.193 INCHES MINIMUM AND 1.243 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM OR ZINC AND CHROMATE OVERALL
THREAD QUANTITY PER INCH18
NOMINAL THREAD SIZE0.312 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
BODY DIAMETER0.515 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
WING SPREAD WIDTH1.193 INCHES MINIMUM AND 1.243 INCHES MAXIMUM IN
OVERALL HEIGHT0.595 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
THREAD CLASS2B
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
GGG-C-105 TY1CL1STAInterchangeable
interchangeable cross-reference
interchangeable
02-0853-22Interchangeable
interchangeable cross-reference
interchangeable
32RLMInterchangeable
interchangeable cross-reference
interchangeable
51618Interchangeable
interchangeable cross-reference
interchangeable
8065BInterchangeable
interchangeable cross-reference
interchangeable
990067F1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35425-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35425-22?
MS35425-22 is a NUT,PLAIN,WING.
What parts can replace MS35425-22?
There are 9 known substitutes for MS35425-22: GGG-C-105 TY1CL1STA, 02-0853-22, 32RLM and 6 more. Substitute compatibility should be verified for your specific system.
Is MS35425-22 still available?
MS35425-22 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35425-22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026