PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35361
MS35361 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_length: 0.292 INCHES MINIMUM IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-050-4026, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35361
NSN: 5305-00-050-4026
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleFILLISTER
head_height0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_length0.292 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-050-4026
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35361 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: SLOT
•
SCREW SURFACE TREATMENT: PASSIVATE
•
NOMINAL THREAD DIAMETER: 0.060 INCHES IN
•
HEAD STYLE: FILLISTER
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
THREAD CLASS: 2A A
•
THREAD SERIES DESIGNATOR: UNF
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLESLOT
SCREW SURFACE TREATMENTPASSIVATE
NOMINAL THREAD DIAMETER0.060 INCHES IN
HEAD STYLEFILLISTER
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS2A A
THREAD SERIES DESIGNATORUNF
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 4S STYLE
THREAD LENGTH0.188 INCHES MINIMUM IN
HEAD DIAMETER0.083 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
43S16452-35Interchangeable
interchangeable cross-reference
interchangeable
12Z8PC282Interchangeable
interchangeable cross-reference
interchangeable
MS35361Interchangeable
interchangeable cross-reference
interchangeable
FFS92TYPE1STYLE4SInterchangeable
interchangeable cross-reference
interchangeable
43S16455-920Interchangeable
interchangeable cross-reference
interchangeable
33029CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35361?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35361?
MS35361 is a SCREW,MACHINE.
What parts can replace MS35361?
There are 11 known substitutes for MS35361: 43S16452-35, 12Z8PC282, MS35361 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35361?
MS35361 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-050-4026. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35361

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026