PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35355-1
MS35355-1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: SQUARE, head_height: 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.750 INCHES MINIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-207-3307, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35355-1
NSN: 5306-00-207-3307
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleSQUARE
head_height0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
thread_class2A A
thread_length0.750 INCHES MINIMUM IN
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats0.363 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
minimum_tensile_strength48000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch20
NSN5306-00-207-3307
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35355-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 20
•
FEATURES PROVIDED: FINISHED HEAD
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD HEIGHT: 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A2 TYPE
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD QUANTITY PER INCH20
FEATURES PROVIDEDFINISHED HEAD
THREAD DIRECTIONRIGHT-HAND
HEAD HEIGHT0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAA2 TYPE
THREAD CLASS2A A
THREAD LENGTH0.750 INCHES MINIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
102484Upgraded Successor
successor cross-reference
successor
FFB575Upgraded Successor
successor cross-reference
successor
MS35354-201Upgraded Successor
successor cross-reference
successor
102495Upgraded Successor
successor cross-reference
successor
109177Upgraded Successor
successor cross-reference
successor
131286Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35355-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35355-1?
MS35355-1 is a BOLT,MACHINE.
What parts can replace MS35355-1?
There are 17 known substitutes for MS35355-1: 102484, FFB575, MS35354-201 and 14 more. Substitute compatibility should be verified for your specific system.
Is MS35355-1 still available?
MS35355-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35355-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026