PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35338-62
MS35338-62 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.334 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PHOSPHATE OVERALL, material_thickness: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-274-8710, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35338-62
NSN: 5310-00-274-8710
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
hole_diameter0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.334 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPHOSPHATE OVERALL
material_thickness0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
end_item_identificationMRAP RG-33 AND RG-33 AUV
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-P-16232 TY Z MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-274-8710
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35338-62 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
OUTSIDE DIAMETER: 0.334 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232 TY Z MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
SURFACE TREATMENT: PHOSPHATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
END ITEM IDENTIFICATIONMRAP RG-33 AND RG-33 AUV
OUTSIDE DIAMETER0.334 INCHES MAXIMUM IN
MATERIAL THICKNESS0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
HOLE DIAMETER0.194 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232 TY Z MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
SURFACE TREATMENTPHOSPHATE OVERALL
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
346-10010Interchangeable
interchangeable cross-reference
interchangeable
0003.0032.KInterchangeable
interchangeable cross-reference
interchangeable
AN935C10LInterchangeable
interchangeable cross-reference
interchangeable
935C10Interchangeable
interchangeable cross-reference
interchangeable
AN935-10Interchangeable
interchangeable cross-reference
interchangeable
10317949Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35338-62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35338-62?
MS35338-62 is a WASHER,LOCK.
What parts can replace MS35338-62?
There are 12 known substitutes for MS35338-62: 346-10010, 0003.0032.K, AN935C10L and 9 more. Substitute compatibility should be verified for your specific system.
Is MS35338-62 still available?
MS35338-62 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35338-62

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026