PartsTable
Technical Data Sheet
Download PDF

MS35338-2 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS35338-2: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.115 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.209 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-010-6494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35338-2
NSN: 5310-00-010-6494
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.115 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.209 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
nondefinitive_spec/std_data2 STYLE AND A CLASS
material_document_and_classificationFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-010-6494
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35338-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 2 STYLE AND A CLASS
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 FED STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.209 INCHES MAXIMUM IN
MATERIAL THICKNESS0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 STYLE AND A CLASS
MATERIALSTEEL OVERALL
HOLE DIAMETER0.115 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
384Reference document
Same NSN cross-reference
Reference document — Secondary reference
105836-9Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
106494Reference document
Same NSN cross-reference
Reference document — Secondary reference
0158110Reference document
Same NSN cross-reference
Reference document — Secondary reference
126761Reference document
Same NSN cross-reference
Reference document — Secondary reference
Y6-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35338-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35338-2?
MS35338-2 is a WASHER,LOCK.
What parts can replace MS35338-2?
There are 7 known substitutes for MS35338-2: 384, 105836-9, 106494 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35338-2?
MS35338-2 is cataloged in the U.S. Government catalog under NSN 5310-00-010-6494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35338-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.