PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35338-145 CRE S 316
MS35338-145 CRE S 316 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM, outside_diameter: 1.079 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-937-0453, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35338-145 CRE S 316
NSN: 5310-00-937-0453
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
hole_diameter0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
outside_diameter1.079 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
end_item_identificationMRAP RG-33; MRAP - COUGAR CAT1 A2; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; LOGISTICS SUPPORT VESSEL
nondefinitive_spec/std_data2 STYLE AND C CLASS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-937-0453
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35338-145 CRE S 316 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 OR STEEL COMP 384 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
HOLE DIAMETER: 0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.079 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 OR STEEL COMP 384 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
END ITEM IDENTIFICATIONMRAP RG-33; MRAP - COUGAR CAT1 A2; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; LOGISTICS SUPPORT VESSEL
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM
SURFACE TREATMENTPASSIVATE OVERALL
HOLE DIAMETER0.636 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
MATERIAL THICKNESS0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.079 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 STYLE AND C CLASS
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
98228Interchangeable
interchangeable cross-reference
interchangeable
164-17Interchangeable
interchangeable cross-reference
interchangeable
98228ADXInterchangeable
interchangeable cross-reference
interchangeable
8731PC27Interchangeable
interchangeable cross-reference
interchangeable
A11523.145.000Interchangeable
interchangeable cross-reference
interchangeable
MS35338-145Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35338-145 CRE S 316?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35338-145 CRE S 316?
MS35338-145 CRE S 316 is a WASHER,LOCK.
What parts can replace MS35338-145 CRE S 316?
There are 14 known substitutes for MS35338-145 CRE S 316: 98228, 164-17, 98228ADX and 11 more. Substitute compatibility should be verified for your specific system.
Is MS35338-145 CRE S 316 still available?
MS35338-145 CRE S 316 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35338-145 CRE S 316

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026