PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35338-11
MS35338-11 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL, hole_diameter: 0.572 INCHES MINIMUM AND 0.587 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.971 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-010-3324, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35338-11
NSN: 5310-00-010-3324
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
hole_diameter0.572 INCHES MINIMUM AND 0.587 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.971 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OVERALL
material_thickness0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
end_item_identificationMRAP - M-ATV WITH CS13 POP AND SNE
nondefinitive_spec/std_data2 STYLE AND A CLASS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-010-3324
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35338-11 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 2 STYLE AND A CLASS
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.971 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OR AISI NATIONAL SPEC ALL MATERIAL RESPONSES OR SAE NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
HOLE DIAMETER: 0.572 INCHES MINIMUM AND 0.587 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA2 STYLE AND A CLASS
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.971 INCHES MAXIMUM IN
MATERIAL THICKNESS0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OR AISI NATIONAL SPEC ALL MATERIAL RESPONSES OR SAE NATIONAL SPEC ALL MATERIAL RESPONSES OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.572 INCHES MINIMUM AND 0.587 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
361-60094Interchangeable
interchangeable cross-reference
interchangeable
W8119088PC14Interchangeable
interchangeable cross-reference
interchangeable
C12A3Interchangeable
interchangeable cross-reference
interchangeable
5310PL0848139Interchangeable
interchangeable cross-reference
interchangeable
12KP132Interchangeable
interchangeable cross-reference
interchangeable
70012-49Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35338-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35338-11?
MS35338-11 is a WASHER,LOCK.
What parts can replace MS35338-11?
There are 23 known substitutes for MS35338-11: 361-60094, W8119088PC14, C12A3 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35338-11?
MS35338-11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-010-3324. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35338-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026