PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35338-104
MS35338-104 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN, hardness_rating: 90.0 ROCKWELL B MINIMUM, outside_diameter: 0.779 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-720-8395, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35338-104
NSN: 5310-00-720-8395
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
hardness_rating90.0 ROCKWELL B MINIMUM
outside_diameter0.779 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OVERALL
material_thickness0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
nondefinitive_spec/std_data2 STYLE AND E CLASS
material_document_and_classificationQQ-B-750,COMP A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-720-8395
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35338-104 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 2 STYLE AND E CLASS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-750,COMP A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.779 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 ROCKWELL B MINIMUM
•
HOLE DIAMETER: 0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA2 STYLE AND E CLASS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-750,COMP A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.779 INCHES MAXIMUM IN
HARDNESS RATING90.0 ROCKWELL B MINIMUM
HOLE DIAMETER0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM IN
MATERIAL THICKNESS0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
2HS104Interchangeable
interchangeable cross-reference
interchangeable
AN935B616LInterchangeable
interchangeable cross-reference
interchangeable
B27-1Interchangeable
interchangeable cross-reference
interchangeable
H-1143-HPC9Interchangeable
interchangeable cross-reference
interchangeable
004-003005-083Interchangeable
interchangeable cross-reference
interchangeable
AN935B1016Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35338-104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35338-104?
MS35338-104 is a WASHER,LOCK.
What parts can replace MS35338-104?
There are 23 known substitutes for MS35338-104: 2HS104, AN935B616L, B27-1 and 20 more. Substitute compatibility should be verified for your specific system.
Is MS35338-104 still available?
MS35338-104 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35338-104

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026