PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35333-72
MS35333-72 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include end_item_identification: 1940-01-218-9165, part_name_assigned_by_controlling_agency: WASHER,LOCK. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-019-0670, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35333-72
NSN: 5310-00-019-0670
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
end_item_identification1940-01-218-9165
part_name_assigned_by_controlling_agencyWASHER,LOCK
NSN5310-00-019-0670
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35333-72 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
OUTSIDE DIAMETER: 0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
MATERIALCOPPER ALLOY OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
MATERIAL THICKNESS0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORFLAT INTERNAL TEETH
OUTSIDE DIAMETER0.325 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
60079G001Interchangeable
interchangeable cross-reference
interchangeable
16203Interchangeable
interchangeable cross-reference
interchangeable
73A8Interchangeable
interchangeable cross-reference
interchangeable
V4225Interchangeable
interchangeable cross-reference
interchangeable
19097Interchangeable
interchangeable cross-reference
interchangeable
G350187S1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35333-72?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35333-72?
MS35333-72 is a WASHER,LOCK.
What parts can replace MS35333-72?
There are 23 known substitutes for MS35333-72: 60079G001, 16203, 73A8 and 20 more. Substitute compatibility should be verified for your specific system.
Is MS35333-72 still available?
MS35333-72 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35333-72

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026