PartsTable
Technical Data Sheet
Download PDF

MS35333-56 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS35333-56: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 1.479 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN, overall_height: 0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES ALL SURFACES, outside_diameter: 1.990 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN, style_designator: SPRING TENSION. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-013-8534, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35333-56
NSN: 5310-00-013-8534
NIINs: 000138534, 007307498
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter1.479 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
overall_height0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES ALL SURFACES
outside_diameter1.990 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
style_designatorSPRING TENSION
features_providedCASEHARDENED
surface_treatmentOXIDE FILM OVERALL
material_thickness0.029 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-11713 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-013-8534
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35333-56 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
HOLE DIAMETER: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT INTERNAL TEETH
OUTSIDE DIAMETER0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAA TYPE
HOLE DIAMETER0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
138534Reference document
Same NSN cross-reference
Reference document — Secondary reference
92X24RReference document
Same NSN cross-reference
Reference document — Secondary reference
XX003-2297Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35333-56?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35333-56?
MS35333-56 is a WASHER,LOCK.
What parts can replace MS35333-56?
There are 3 known substitutes for MS35333-56: 138534, 92X24R, XX003-2297. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35333-56?
MS35333-56 is cataloged in the U.S. Government catalog under NSN 5310-00-013-8534. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35333-56

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.