PartsTable
Technical Data Sheet
Download PDF

MS35333-3 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS35333-3: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN, outside_diameter: 0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, material_thickness: 0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-5543, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35333-3
NSN: 5310-00-011-5543
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
outside_diameter0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
material_thickness0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
NSN5310-00-011-5543
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35333-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
OUTSIDE DIAMETER: 0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT INTERNAL TEETH
OUTSIDE DIAMETER0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
MATERIAL THICKNESS0.017 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
115543Reference document
Same NSN cross-reference
Reference document — Secondary reference
0912729Reference document
Same NSN cross-reference
Reference document — Secondary reference
1206-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
7435-98XReference document
Same NSN cross-reference
Reference document — Secondary reference
MILW6986AMENDITYPEAReference document
Same NSN cross-reference
Reference document — Identification reference
912729Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35333-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35333-3?
MS35333-3 is a WASHER,LOCK.
What parts can replace MS35333-3?
There are 8 known substitutes for MS35333-3: 115543, 0912729, 1206-00 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35333-3?
MS35333-3 is cataloged in the U.S. Government catalog under NSN 5310-00-011-5543. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35333-3