MS35333-107 — WASHER,LOCK

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

MS35333-107: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.195 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN, outside_diameter: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, material_thickness: 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN, nondefinitive_spec/std_data: A TYPE. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-019-0672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS35333-107

NSN: 5310-00-019-0672
FSC: 5310 — Nuts and Washers
CAGE: 80205 — NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE (USA)

SPECIFICATIONS

material	COPPER ALLOY OVERALL
hole_diameter	0.195 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
outside_diameter	0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
style_designator	FLAT INTERNAL TEETH
material_thickness	0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
nondefinitive_spec/std_data	A TYPE
material_document_and_classification	QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5310-00-019-0672

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: FLAT INTERNAL TEETH

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN

•

NONDEFINITIVE SPEC/STD DATA: A TYPE

•

MATERIAL: COPPER ALLOY OVERALL

•

HOLE DIAMETER: 0.195 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	FLAT INTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER	0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA	A TYPE
MATERIAL	COPPER ALLOY OVERALL
HOLE DIAMETER	0.195 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 8

FFW100Reference document

Same NSN cross-reference

Reference document — Identification reference

43W5741-138Reference document

Same NSN cross-reference

Reference document — Secondary reference

WL110PBCReference document

Same NSN cross-reference

Reference document — Secondary reference

4W24516GA06Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

4198000-054Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2010760PC7Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy MS35333-107?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS35333-107?

MS35333-107 is a WASHER,LOCK.

What parts can replace MS35333-107?

There are 8 known substitutes for MS35333-107: FFW100, 43W5741-138, WL110PBC and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MS35333-107?

MS35333-107 is cataloged in the U.S. Government catalog under NSN 5310-00-019-0672. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS35333-107 — WASHER,LOCK

Request a Quote — MS35333-107