PartsTable
Technical Data Sheet
Download PDF

MS3533-41 — RETAINER,ELECTRICAL CONNECTOR

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

MS3533-41: RETAINER,ELECTRICAL CONNECTOR.

The RETAINER,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include hole_diameter: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.500 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN, special_features: WEDGE-PLUG LOCK, style_designator: FLAT INTERNAL TEETH, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-821-6269, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS3533-41
NSN: 5310-00-821-6269
NIINs: 008216269, 015144455
FSC: 5310 — Nuts and Washers
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
hole_diameter0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.500 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
special_featuresWEDGE-PLUG LOCK
style_designatorFLAT INTERNAL TEETH
surface_treatmentCADMIUM OVERALL
material_thickness0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
end_item_identificationNSN 3805-01-497-0697
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-821-6269
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS3533-41 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.500 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.500 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
MATERIAL THICKNESS0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV)
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
0909367-5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS35334-10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS35334-19Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310008216269Reference document
Same NSN cross-reference
Reference document — Secondary reference
GM174878Reference document
Same NSN cross-reference
Reference document — Secondary reference
2151200007Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MS3533-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS3533-41?
MS3533-41 is a RETAINER,ELECTRICAL CONNECTOR.
What parts can replace MS3533-41?
There are 8 known substitutes for MS3533-41: 0909367-5, MS35334-10, MS35334-19 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS3533-41?
MS3533-41 is cataloged in the U.S. Government catalog under NSN 5310-00-821-6269. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS3533-41

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.