PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35311-190L1
MS35311-190L1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, head_style: HEXAGON, head_height: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.750 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN, fastener_length: 2.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-041-2828, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35311-190L1
NSN: 5305-01-041-2828
FSC: 5305
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
head_styleHEXAGON
head_height0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN
thread_class2A A
thread_length1.750 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
fastener_length2.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
nominal_thread_diameter0.750 INCHES IN
thread_quantity_per_inch10
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
criticality_code_justificationZZZX
NSN5305-01-041-2828
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35311-190L1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.750 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 2A A
•
MATERIAL: NICKEL ALLOY OVERALL
•
DEPARTURE FROM CITED DESIGNATOR: MATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281,CLASS 4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FASTENER LENGTH: 2.750 INCHES NOMINAL IN
•
WIDTH BETWEEN FLATS: 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH1.750 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2A A
MATERIALNICKEL ALLOY OVERALL
DEPARTURE FROM CITED DESIGNATORMATERIAL CONTROLLED IAW NAVSEA 0948-LP-045-7010 MATERIAL CONTROL STANDARD FOR LEVEL I ITEMS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281,CLASS 4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FASTENER LENGTH2.750 INCHES NOMINAL IN
WIDTH BETWEEN FLATS1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
HEAD STYLEHEXAGON
NOMINAL THREAD DIAMETER0.750 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
MS35311-190Interchangeable
interchangeable cross-reference
interchangeable
800-0750-22-320Interchangeable
interchangeable cross-reference
interchangeable
3/4-10UNC X 2-3/4 LGInterchangeable
interchangeable cross-reference
interchangeable
7/8-9UNC-2A X 4IN CLASS A TYPL1Interchangeable
interchangeable cross-reference
interchangeable
MS35311-217Interchangeable
interchangeable cross-reference
interchangeable
MS35311-217L1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35311-190L1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35311-190L1?
MS35311-190L1 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35311-190L1?
There are 21 known substitutes for MS35311-190L1: MS35311-190, 800-0750-22-320, 3/4-10UNC X 2-3/4 LG and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35311-190L1?
MS35311-190L1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-041-2828. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35311-190L1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026