PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35307-426
MS35307-426 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.250 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES THREADS, fastener_length: 4.656 INCHES MINIMUM AND 4.750 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-964-0642, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35307-426
NSN: 5305-00-964-0642
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class2A A
thread_length1.250 INCHES MINIMUM AND 1.443 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length4.656 INCHES MINIMUM AND 4.750 INCHES MAXIMUM IN
hardness_rating80.0 ROCKWELL B MINIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
minimum_yield_strength30000 POUNDS PER SQUARE INCH LBS
nominal_thread_diameter0.500 INCHES IN
NSN5305-00-964-0642
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35307-426 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 13
•
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH LBS
•
SURFACE FINISH: 63.0 MICROINCHES THREADS
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 OR STEEL COMP 384 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD HEIGHT0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH13
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH LBS
SURFACE FINISH63.0 MICROINCHES THREADS
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 OR STEEL COMP 384 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING80.0 ROCKWELL B MINIMUM OVERALL
FASTENER LENGTH4.656 INCHES MINIMUM AND 4.750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
3000426-012Interchangeable
interchangeable cross-reference
interchangeable
4720001393968Interchangeable
interchangeable cross-reference
interchangeable
4377Interchangeable
interchangeable cross-reference
interchangeable
2841-2Interchangeable
interchangeable cross-reference
interchangeable
NC0772734Interchangeable
interchangeable cross-reference
interchangeable
1682745Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35307-426?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35307-426?
MS35307-426 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35307-426?
There are 10 known substitutes for MS35307-426: 3000426-012, 4720001393968, 4377 and 7 more. Substitute compatibility should be verified for your specific system.
Is MS35307-426 still available?
MS35307-426 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35307-426

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026