PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35307-312
MS35307-312 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.750 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN, fastener_length: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-207-2297, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35307-312
NSN: 5305-00-207-2297
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class2A A
thread_length0.750 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
fastener_length1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
special_featuresCRES COMP 316 ONLY
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
end_item_identificationMRAP - M-ATV DV178
nominal_thread_diameter0.250 INCHES IN
NSN5305-00-207-2297
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35307-312 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD QUANTITY PER INCH: 20
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
FASTENER LENGTH1.500 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
NOMINAL THREAD DIAMETER0.250 INCHES IN
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
THREAD QUANTITY PER INCH20
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
10109124Interchangeable
interchangeable cross-reference
interchangeable
331213Interchangeable
interchangeable cross-reference
interchangeable
M41CO 13Interchangeable
interchangeable cross-reference
interchangeable
NAS907 TYFSZ13Interchangeable
interchangeable cross-reference
interchangeable
NAS907Interchangeable
interchangeable cross-reference
interchangeable
1/4-20UNC-2AX1- 1/2" LG, GR 316Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35307-312?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35307-312?
MS35307-312 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35307-312?
There are 17 known substitutes for MS35307-312: 10109124, 331213, M41CO 13 and 14 more. Substitute compatibility should be verified for your specific system.
Is MS35307-312 still available?
MS35307-312 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35307-312

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026