PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35307-308B
MS35307-308B ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.000 INCHES MAXIMUM IN, fastener_length: 1.000 INCHES NOMINAL IN, special_features: SAME AS MS35307-308W/BLACK OXIDE FINISH W. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-207-8253, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35307-308B
NSN: 5305-00-207-8253
FSC: 5305
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class2A A
thread_length1.000 INCHES MAXIMUM IN
fastener_length1.000 INCHES NOMINAL IN
special_featuresSAME AS MS35307-308W/BLACK OXIDE FINISH W
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
end_item_identification5895014767819
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch20
NSN5305-00-207-8253
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35307-308B · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
HEAD STYLE: HEXAGON
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD QUANTITY PER INCH: 20
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
•
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
HEAD STYLEHEXAGON
NOMINAL THREAD DIAMETER0.250 INCHES IN
END ITEM IDENTIFICATIONMRAP-RG-33 ARMORED UTILITY VEHICLE (AUV); MRAP - COUGAR AMBULANCE; MRAP - M-ATV WITH CS13 POP AND SNE; MRAP - COUGAR TOW; MRAP - COUGAR SABR/TOW; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
THREAD QUANTITY PER INCH20
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH LBS
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
HARDNESS RATING80.0 ROCKWELL C MINIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
9000251-1Interchangeable
interchangeable cross-reference
interchangeable
87000251-1Interchangeable
interchangeable cross-reference
interchangeable
28352Interchangeable
interchangeable cross-reference
interchangeable
1626830P1Interchangeable
interchangeable cross-reference
interchangeable
28.352Interchangeable
Drill Set,pivot,jeweler's
interchangeable
36582Interchangeable
Drill Set,pivot,jeweler's
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35307-308B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35307-308B?
MS35307-308B is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35307-308B?
There are 20 known substitutes for MS35307-308B: 9000251-1, 87000251-1, 28352 and 17 more. Substitute compatibility should be verified for your specific system.
Is MS35307-308B still available?
MS35307-308B is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35307-308B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026