PartsTable
Technical Data Sheet
Download PDF

MS35298-83 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35298-83: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-018-1659, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35298-83
NSN: 5305-00-018-1659
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
thread_class2A A
thread_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
hardness_rating90.0 ROCKWELL B MINIMUM AND 21.7 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
width_between_flats0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
nominal_thread_diameter0.438 INCHES IN
minimum_tensile_strength90000 POUNDS PER SQUARE INCH LBS
NSN5305-00-018-1659
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35298-83 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TYPE 2,CLASS 3 ASSN STD 2ND TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 ROCKWELL B MINIMUM AND 21.7 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A449,GRADE 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.438 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TYPE 2,CLASS 3 ASSN STD 2ND TREATMENT RESPONSE OVERALL
THREAD LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
HARDNESS RATING90.0 ROCKWELL B MINIMUM AND 21.7 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A449,GRADE 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.438 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA81348-FF-S-85 GOVERNMENT SPECIFICATION AND 96906-MS35298/CANCELED/ GOVERNMENT STANDARD
SUBSTITUTES & CROSS-REFERENCES 6
262209Reference document
Same NSN cross-reference
Reference document — Secondary reference
181659Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
60X3253Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FF-S-85Reference document
Same NSN cross-reference
Reference document — Identification reference
181135Reference document
Same NSN cross-reference
Reference document — Secondary reference
214768Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35298-83?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35298-83?
MS35298-83 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35298-83?
There are 6 known substitutes for MS35298-83: 262209, 181659, 60X3253 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35298-83?
MS35298-83 is cataloged in the U.S. Government catalog under NSN 5305-00-018-1659. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35298-83

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.