PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35296-34
MS35296-34 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.875 INCHES MINIMUM IN, fastener_length: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-018-1339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35296-34
NSN: 5306-00-018-1339
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
thread_length0.875 INCHES MINIMUM IN
fastener_length1.000 INCHES NOMINAL IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
minimum_tensile_strength120000 POUNDS PER SQUARE INCH LBS
NSN5306-00-018-1339
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35296-34 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH LBS
•
HEAD STYLE: HEXAGON
•
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.312 INCHES IN
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
HEAD STYLEHEXAGON
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
THREAD CLASS2A A
THREAD QUANTITY PER INCH24
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
181339Upgraded Successor
successor cross-reference
successor
0181339Upgraded Successor
successor cross-reference
successor
FFS85TYPE2STYLE10PGRADE5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35296-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35296-34?
MS35296-34 is a BOLT,MACHINE.
What parts can replace MS35296-34?
There are 3 known substitutes for MS35296-34: 181339, 0181339, FFS85TYPE2STYLE10PGRADE5. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35296-34?
MS35296-34 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-018-1339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35296-34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026