MS35295-85 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

MS35295-85: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.000 INCHES MAXIMUM IN, fastener_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-017-9858, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MS35295-85

NSN: 5305-00-017-9858
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	STEEL OVERALL
head_style	HEXAGON
head_height	0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
thread_class	2A A
thread_length	1.000 INCHES MAXIMUM IN
fastener_length	1.000 INCHES NOMINAL IN
hardness_rating	23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_direction	RIGHT-HAND
width_between_flats	0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
nominal_thread_diameter	0.438 INCHES IN
minimum_tensile_strength	120000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch	14
NSN	5305-00-017-9858

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.000 INCHES NOMINAL IN

•

THREAD LENGTH: 1.000 INCHES MAXIMUM IN

•

HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL

•

NOMINAL THREAD DIAMETER: 0.438 INCHES IN

•

HEAD STYLE: HEXAGON

•

THREAD DIRECTION: RIGHT-HAND

•

WIDTH BETWEEN FLATS: 0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.272 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
FASTENER LENGTH	1.000 INCHES NOMINAL IN
THREAD LENGTH	1.000 INCHES MAXIMUM IN
HARDNESS RATING	23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER	0.438 INCHES IN
HEAD STYLE	HEXAGON
THREAD DIRECTION	RIGHT-HAND
WIDTH BETWEEN FLATS	0.612 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH	120000 POUNDS PER SQUARE INCH LBS
THREAD CLASS	2A A

SUBSTITUTES & CROSS-REFERENCES 3

FF-S-85Reference document

Same NSN cross-reference

Reference document — Identification reference

179858Reference document

Same NSN cross-reference

Reference document — Secondary reference

14X3280Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy MS35295-85?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MS35295-85?

MS35295-85 is a SCREW,CAP,HEXAGON HEAD.

What parts can replace MS35295-85?

There are 3 known substitutes for MS35295-85: FF-S-85, 179858, 14X3280. Substitute compatibility should be verified for your specific system.

What is the NSN for MS35295-85?

MS35295-85 is cataloged in the U.S. Government catalog under NSN 5305-00-017-9858. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MS35295-85 — SCREW,CAP,HEXAGON HEAD

Request a Quote — MS35295-85