PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35295-116
MS35295-116 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.312 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 1.250 INCHES MINIMUM IN, fastener_length: 2.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-017-9890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35295-116
NSN: 5305-00-017-9890
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.312 INCHES NOMINAL IN
thread_class2A A
thread_length1.250 INCHES MINIMUM IN
fastener_length2.250 INCHES NOMINAL IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
width_between_flats0.750 INCHES NOMINAL IN
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength125000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch13
NSN5305-00-017-9890
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35295-116 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.312 INCHES NOMINAL IN
•
THREAD LENGTH: 1.250 INCHES MINIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL: STEEL OVERALL
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.312 INCHES NOMINAL IN
THREAD LENGTH1.250 INCHES MINIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MATERIALSTEEL OVERALL
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 5 GRADE
HEAD STYLEHEXAGON
THREAD CLASS2A A
NOMINAL THREAD DIAMETER0.500 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
123SEAV10490-95Interchangeable
interchangeable cross-reference
interchangeable
106343Interchangeable
interchangeable cross-reference
interchangeable
A-98585Interchangeable
interchangeable cross-reference
interchangeable
JM43LC14WD8XInterchangeable
interchangeable cross-reference
interchangeable
385-8Interchangeable
interchangeable cross-reference
interchangeable
S281-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35295-116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35295-116?
MS35295-116 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35295-116?
There are 8 known substitutes for MS35295-116: 123SEAV10490-95, 106343, A-98585 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35295-116?
MS35295-116 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-017-9890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35295-116

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026