PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35294-31
MS35294-31 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.625 INCHES MAXIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-012-1733, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35294-31
NSN: 5306-00-012-1733
FSC: 5306
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
thread_length0.625 INCHES MAXIMUM IN
fastener_length0.625 INCHES NOMINAL IN
hardness_rating100.0 ROCKWELL B MAXIMUM OVERALL
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentPHOSPHATE OVERALL
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
NSN5306-00-012-1733
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35294-31 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
MINIMUM TENSILE STRENGTH: 69000 POUNDS PER SQUARE INCH LBS
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 2 GRADE
•
THREAD SERIES DESIGNATOR: UNF
•
HARDNESS RATING: 100.0 ROCKWELL B MAXIMUM OVERALL
•
HEAD STYLE: HEXAGON
•
SURFACE TREATMENT: PHOSPHATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
THREAD CLASS2A A
MINIMUM TENSILE STRENGTH69000 POUNDS PER SQUARE INCH LBS
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 2 GRADE
THREAD SERIES DESIGNATORUNF
HARDNESS RATING100.0 ROCKWELL B MAXIMUM OVERALL
HEAD STYLEHEXAGON
SURFACE TREATMENTPHOSPHATE OVERALL
FEATURES PROVIDEDFINISHED HEAD
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
45135Interchangeable
interchangeable cross-reference
interchangeable
2410 29/32Interchangeable
interchangeable cross-reference
interchangeable
C12240Interchangeable
interchangeable cross-reference
interchangeable
53158Interchangeable
interchangeable cross-reference
interchangeable
C132Interchangeable
interchangeable cross-reference
interchangeable
717-022065Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35294-31?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35294-31?
MS35294-31 is a BOLT,MACHINE.
What parts can replace MS35294-31?
There are 20 known substitutes for MS35294-31: 45135, 2410 29/32, C12240 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35294-31?
MS35294-31 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-012-1733. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35294-31

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026