PartsTable
Technical Data Sheet
Download PDF

MS35293-112 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

MS35293-112: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.125 INCHES MINIMUM IN, fastener_length: 1.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-011-9844, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35293-112
NSN: 5305-00-011-9844
FSC: 5305 — Screws
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class2A A
thread_length1.125 INCHES MINIMUM IN
fastener_length1.375 INCHES NOMINAL IN
hardness_rating100.0 ROCKWELL B MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentPHOSPHATE OVERALL
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength69000 POUNDS PER SQUARE INCH LBS
NSN5305-00-011-9844
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35293-112 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.375 INCHES NOMINAL IN
•
THREAD LENGTH: 1.125 INCHES MINIMUM IN
•
HARDNESS RATING: 100.0 ROCKWELL B MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
FASTENER LENGTH1.375 INCHES NOMINAL IN
THREAD LENGTH1.125 INCHES MINIMUM IN
HARDNESS RATING100.0 ROCKWELL B MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE AND 2 GRADE
SURFACE TREATMENTPHOSPHATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
119844Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MS35293-112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35293-112?
MS35293-112 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35293-112?
There is 1 known substitute for MS35293-112: 119844. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35293-112?
MS35293-112 is cataloged in the U.S. Government catalog under NSN 5305-00-011-9844. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35293-112

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.