PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35293-107
MS35293-107 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.750 INCHES NOMINAL IN, fastener_length: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-577-5448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35293-107
NSN: 5305-00-577-5448
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class2A A
thread_length0.750 INCHES NOMINAL IN
fastener_length0.750 INCHES NOMINAL IN
hardness_rating100.0 ROCKWELL B MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentPHOSPHATE OVERALL
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength69000 POUNDS PER SQUARE INCH LBS
NSN5305-00-577-5448
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35293-107 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
MATERIAL: STEEL OVERALL
•
HARDNESS RATING: 100.0 ROCKWELL B MAXIMUM OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.750 INCHES NOMINAL IN
SURFACE TREATMENTPHOSPHATE OVERALL
MATERIALSTEEL OVERALL
HARDNESS RATING100.0 ROCKWELL B MAXIMUM OVERALL
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.500 INCHES IN
THREAD CLASS2A A
MINIMUM TENSILE STRENGTH69000 POUNDS PER SQUARE INCH LBS
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
FFS85AMEND2TYPE2STYLE10PGRADE2Interchangeable
interchangeable cross-reference
interchangeable
MS35289-60Interchangeable
interchangeable cross-reference
interchangeable
3578Interchangeable
interchangeable cross-reference
interchangeable
MS35289-89Interchangeable
interchangeable cross-reference
interchangeable
MS35289-115Interchangeable
interchangeable cross-reference
interchangeable
MS35290-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35293-107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35293-107?
MS35293-107 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35293-107?
There are 12 known substitutes for MS35293-107: FFS85AMEND2TYPE2STYLE10PGRADE2, MS35289-60, 3578 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS35293-107?
MS35293-107 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-577-5448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35293-107

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026